Kiocera 9100 Operation Guide

Operation Guide

Please read this Operation Guide before using the printer.
Keep it close to the printer for easy reference.

Please read the Operation Guide before using the printer.
Keep it close to the printer for easy reference.
The sections of this guide and parts of the printer marked with
symbols are safety warnings meant to protect the user, other individuals and surroundingobjects, and ensure correct and safe
usage of the printer. The symbols and their meanings are indicated below.
WARNING: Indicates that serious injury or even death may
result from insufficient attention to or incorrect compliance with
the related points.

Caution
NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY
IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUSTSUPPORT
THE PRINTER’S EMULATION MODE. The printer is factory-set
to emulate the PCL. The emulation mode can be changed by following the procedures described in Chapter 3.
Notice

CAUTION: Indicates that personal injury or mechanical
damage may result from insufficient attention to or incorrect
compliance with the related points.

The information in this guide is subject to change withoutnotification. Additional pages may be inserted in future editions. The
user is asked to excuse any technical inaccuracies or typographical errors in the present edition.

Symbols
The
symbol indicates that the related section includes safety
warnings. Specific points of attention are indicated inside the
symbol.

No responsibility is assumed if accidents occur while the user is
followingthe instructions in this guide. No responsibility is assumed for defects in the printer’s firmware (contents of its readonly memory).

....... [General warning]

....... [Warning of danger of electrical shock]

....... [Warning of high temperature]
The
symbol indicates that the related section includes information on prohibited actions. Specifics of the prohibited action
are indicatedinside the symbol.
........ [Warning of prohibited action]

......... [Disassembly prohibited]
The
symbol indicates that the related section includes information on actions which must be performed. Specifics of the required action are indicated inside the symbol.
......... [Alert of required action]

........ [Remove the power plug from the outlet]

........ [Always connect the printer to anoutlet
with a ground connection]
Please contact your service representative to order a replacement if the safety warnings in the guide are illegible or if the
guide itself is missing. (fee required)

This guide, any copyrightable subject matter sold or provided
with or in connection with the sale of the page printer, are protected by copyright. All rights are reserved. Copying or otherreproduction of all or part of this guide, any copyrightable subject
matter without the prior written consent of Kyocera Corporation
is prohibited. Any copies made of all or part of this guide, any
copyrightable subject must contain the same copyright notice as
the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation.
KPDL andKIR (Kyocera Image Refinement) are trademarks of
Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter
X24E is a product of International Business Machines Corporation. Epson LQ-850 is a product of Seiko Epson Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of Centronics Data Computer Inc.PostScript is a registered trademark
of Adobe Systems Incorporated. Macintosh is a registered trademark of Apple computer, Inc. Microsoft, Windows, and Windows
NT are registered trademarks of Microsoft Corporation. PowerPC is trademark of International Business Machines Corporation. CompactFlash is a trademark of SanDisk Corporation.
ENERGY STAR is a U.S. registered mark. All other brand and...